发表年份 |
论文题目 |
研究生 |
导师 |
刊物名称 |
2026 |
回火温度对预变形条件下的 QP980 钢组织及性能的影响 |
李颂勋 |
张春 |
金属热处理 |
2026 |
AZ31B镁/6061铝异种合金搅拌摩擦焊工艺研究 |
满武士 |
周博芳 |
热加工工艺 |
2026 |
H13钢表面激光定向能量沉积AlCoCrFeNi2.1高熵合金涂层 的组织及性能 |
李怀博 |
曾大新 |
金属热处理 |
2026 |
激光熔覆AlxCoCrFeNi2.1高熵合金的组织与性能 |
李怀博 |
曾大新 |
精密成形工程 |
2026 |
室温旋锻加工及时效热处理对VW93镁合金微观组织和力学 性能的影响研究 |
陈达 |
罗成 |
特种铸造及有色合金 |
2026 |
QP1180/DP1180 超高强钢粗晶热影响区相变行为及 其硬化机理 |
李文娟 |
王金凤 |
材料工程 |
2025 |
Improvement of strength and ductility of TC4p/AZ91D magnesium matrix composites by modifying the extrusion ratio |
余祖英 |
孙建新 |
Journal of Magnesium and alloys |
2025 |
Sb变质对ZAlSi7Cu2Mg合金组织和力学性能的影响 |
李钦 |
曾大新 |
特种铸造及有色合金 |
2025 |
变截面铝合金传动轴管结构优化设计及内高压成形研究 |
彭喆 |
奚建胜 |
特种铸造及有色合金 |
2025 |
晶体塑性有限元模拟AA2024铝合金轧制过程中织构演变 |
曲阳 |
赵齐 |
特种铸造及有色合金 |
2025 |
纳米多孔MoO3的制备及形貌调控 |
李翔 |
罗成 |
材料与冶金学报 |
2025 |
Effect of microstructure and mechanical properties of Al/Mg dissimilar alloy with Pb interlayer by friction stir welding |
冯海傲 |
张红霞 |
Journal of Science: Advanced Materials and Devices |
2025 |
High performance metal-supported solid oxide fuel cells with Ni-Fe alloy support |
陈一苇 |
周博芳 |
International Journal of Hydrogen Energy |
2025 |
SnCu/NiCu合金涂层对复合铸造铝/钢双金属界面组织与性能的影响 |
肖明 |
曾大新 |
特种铸造及有色合金 |
2025 |
Sn中间层对铝/镁异种合金焊接接头微观组织与力学性能的影响 |
冯海傲 |
张红霞 |
特种铸造及有色合金 |
2025 |
Structure and protective effect of aluminium coated Nd-Fe-B magnets before and after grain boundary diffusion |
张详浩 |
胡志华 |
Anti-Corrosion Methods and Materials |
2025 |
TC4钛合金表面激光熔覆AlCoCrFeNi高熵合金的组织与性能 |
程一凡 |
李峰光 |
表面技术 |
2025 |
ZLA356-6061-T6铝合金MIG焊接头微观组织和性能研究 |
李科 |
张元好 |
特种铸造及有色合金 |
2025 |
摆弧工艺对丝弧增材制造Al5356直壁构件成形质量和组织性能的影响 |
王晋 |
孙建新 |
材料工程 |
2025 |
薄覆层6082/AZ31/6082三层复合板FSW接头组织与力学性能研究 |
张辰宇 |
王天国 |
特种铸造及有色合金 |
2025 |
保压压力对7075铝合金后续时效行为的影响 |
徐飞越 |
李兵 |
精密成形工程 |
2025 |
镝晶界扩散增强烧结Ce-Fe-B磁体的磁性能和微观结构研究 |
张详浩 |
胡志华 |
中国稀土学报 |
2025 |
基于响应面法的7075铝合金非等温时效工艺优化 |
刘文巧 |
王敏 |
金属热处理 |
2025 |
基于响应面法的球墨铸铁激光表面硬化工艺参数优化 |
蒋程杰 |
刘建永 |
金属热处理 |
2025 |
液固双金属复合铸造及其在汽车轻量化制造中应用 |
肖明 |
曾大新 |
汽车工艺与材料 |
2025 |
Copper incorporation induced oxygen vacancy MoO3 anode and Zn dendrite inhibitor for high performance aqueous zinc ion batteries |
李卓 |
李峰光 |
Journal of Energy Storage |
2025 |
Interfacial bonding and strengthening mechanism of Al-modified Ti particles reinforced VW94M magnesium matrix composites |
毛盛 |
张春 |
Materials Today Communications |
2025 |
Martensitic Transformation Mechanism In Situ Observation for the Simulated Coarse-Grained Heat-Affected Zone of DP1180 Steel |
李文娟 |
王金凤 |
Materials |
2025 |
Microstructure and tensile properties of heterostructured 7075 aluminum alloy laminates |
陈文轩 |
李兵 |
Journal of Alloys and Compounds |
2025 |
Microstructure-dependent phosphating film formation and its corrosion behavior in AZ91 Mg alloy: Effect of extrusion temperature |
白浩龙 |
苑旭雯 |
Journal of Materials Research and Technology |
2025 |
Polyaniline-coated NH4+pre-intercalated MoO3 nanobelts for high performance aqueous zinc ion batteries |
李卓 |
李峰光 |
Materials Today Physics |
2025 |
QP1180 淬火-配分钢激光焊接接头微观 组织及力学性能 |
李文娟 |
王金凤 |
精密成形工程 |
2025 |
Tailoring precipitation phases of AZ91 Mg alloy to enhance corrosion resistance of phosphating film |
白浩龙 |
苑旭雯 |
Materials Today Communications |
2025 |
不等厚异质 QP1180/DP1180 钢板激光拼焊接 头组织及性能研究 |
李文娟 |
王金凤 |
精密成形工程 |
2025 |
高碱性环境中Cl-和SO42-协同作用对304不锈钢腐蚀行为的影响 |
白浩龙 |
苑旭雯 |
腐蚀与防护 |
2025 |
基于析出相调控的AZ91镁合金腐蚀行为演变机理研究 |
白浩龙 |
苑旭雯 |
金属热处理 |
2025 |
挤压温度诱导的微观结构演变对AZ91镁合金力学性能与腐蚀行为的影响机制研究 |
白浩龙 |
苑旭雯 |
金属热处理 |
2025 |
热冲压淬火顺序对QP1180/22MnB5 钢激光拼焊接头组织与力学性能的影响 |
李文娟 |
王金凤 |
材料工程 |
2025 |
Effect of brazing parameters on the microstructure and mechanical properties of SiC ceramic joint with Zr-Cu-Nb filler metal |
冷子旋 |
周博芳 |
Nuclear Engineering and Technology |
2025 |
Effect of brazing parameter and Zr-Cu-Ti powder filler metal on the microstructure and mechanical properties of SiC ceramic joints |
冷子旋 |
周博芳 |
Nuclear Engineering and Design |
2025 |
Microstructure and corrosion behavior of AZ31 alloy prepared by rapid solidification |
杨名洋 |
黄海铭 |
Materials Letters |
2024 |
变形量对粉末冶金零件表面致密化的研究 |
黄贤 |
罗成 |
粉末冶金工业 |
2024 |
工艺参数对电弧增材制造5356铝合金成形质量和组织性能影响 |
虞华森 |
孙建新 |
特种铸造及有色合金 |
2024 |
自阻加热温度对5052铝合金板力学性能和组织的影响 |
邓云飞 |
李兵 |
热加工工艺 |
2024 |
QP1180与22MnB5激光拼焊接头组织与力学性能研究 |
苏文超 |
王金凤 |
应用激光 |
2024 |
Texture evolution and stress formation behavior during tensile deformation using crystal plasticity |
曲阳 |
赵齐 |
Materials Science and Technology |
2024 |
Texture formation under control of S phase characteristic and tensile property of hot-rolling 2A12 aluminum alloy improved by Brass texture |
曲阳 |
赵齐 |
Materials Science and Engineering A |
2024 |
Ti 颗粒表面包覆处理对镁基复合材料界面及力学性 能的影响 |
汪逸飞 |
刘建永 |
铸造 |
2024 |
电控差速锁壳体热锻工艺方案设计与优化 |
李旭辉 |
王敏 |
精密成形工程 |
2024 |
基于PointNet++的焊装夹具零件识别 |
徐华 |
陶长城 |
组合机床与自动化加工技术 |
2024 |
铝合金时效处理对钢/铝自冲铆接成形的影响 |
覃宇 |
李兵 |
锻压技术 |
2024 |
球墨铸铁与灰口铸铁激光表面硬化能力对比研究 |
周显敏 |
曾大新 |
金属热处理 |
2024 |
热成形淬火对QP1180/22MnB5激光拼焊板组织与性能的影响 |
苏文超 |
王金凤 |
精密成形工程 |
2024 |
异种铝合金搅拌摩擦焊工艺研究 |
田洋 |
张元好 |
特种铸造及有色合金 |
2024 |
20CrMoH合金钢减速器伞齿轮轴断裂失效分析 |
徐飞越 |
李兵 |
金属热处理 |
2024 |
Comparing Electrochemical Passivation and Surface Film Chemistry of 654SMO Stainless Steel and C276 Alloy in Simulated Flue Gas Desulfurization Condensates |
程一凡 |
李峰光 |
Materials |
2024 |
Corrosion behavior of Cu-40Zn alloy in a periodic service between simulating atmospheric and deep sea environment |
刘忠 |
胡胜波 |
Corrosion Reviews |
2024 |
Development of Zn–22Al–xAg filler metals for Brazing 6061 aluminum alloy to T2 copper |
翟云龙 |
王天国 |
Welding in the world |
2024 |
Dual-gradient ceramic/aluminum composite structure fabricated by arc additive manufacturing with co-conveying of wire and powder |
王晋 |
孙建新 |
Materials Research Letter |
2024 |
Effect of Al Content on the Microstructure and Properties of Zn-Al Solder Alloys |
翟云龙 |
王天国 |
metals |
2024 |
Effect of cold-rolling and annealing temperature on microstructure, texture evolution and mechanical properties of FeCoCrNiMn high-entropy alloy |
程一凡 |
李峰光 |
Journal of Materials Research and Technology |
2024 |
Effect of the Mn content on the microstructure and mechanical properties of extruded Mg-9Gd-4Y-1Zn-xMn series alloys |
周荣笑 |
张春 |
Materials Today Communications |
2024 |
Hierarchical aggregation structure regulation and electromagnetic loss mechanism of cross-linked polyaniline in polymer wave absorbers |
牛志鹏 |
王越 |
Carbon |
2024 |
Optimized design of silicone oil torsional damper for diesel generator |
邱泽旭 |
陈荣创 |
Journal of Physics: Conference Series |
2024 |
QP1180超高强钢复杂构件冷冲压成形性能 |
徐飞越 |
李兵 |
锻压技术 |
2024 |
QP980淬火-配分钢热模拟激光焊接热影响区性能研究 |
郭亿 |
王金凤 |
焊接学报 |
2024 |
Study on Heat Dissipation of Torsional Vibration Damper for Engine Crankshaft |
邱泽旭 |
陈荣创 |
Journal of Physics: Conference Series |
2024 |
Torsional damper design for diesel engine: theory and application |
邱泽旭 |
陈荣创 |
Phsica Scripta |
2024 |
电弧熔覆韧-硬复合层工艺及性能研究 |
郭亿 |
王金凤 |
精密成型工程 |
2024 |
固溶温度和保压淬火时间对铝合金板材组织和性能的影响 |
徐飞越 |
李兵 |
精密成形工程 |
2024 |
回火温度对低碳高强钢组织和力学性能影响 |
徐飞越 |
李兵 |
精密成形工程 |
2024 |
机械合金化结合真空热压烧结技术制备Al1.5CoCrFeNiMo0.4高熵合金 |
郭亿 |
王金凤 |
精密成型工程 |
2024 |
四种铝合金焊丝电弧增材制造构件的成形质量和组织性能对比 |
王晋 |
孙建新 |
电焊机 |
2024 |
温成形对QP980钢板力学行为及微观组织演变的影响 |
徐飞越 |
李兵 |
锻压技术 |
2024 |
预处理条件对QP980钢组织及塑性失稳行为的影响 |
徐飞越 |
李兵 |
材料导报 |
2024 |
预应变速率对QP1180钢微观组织和力学性能影响 |
徐飞越 |
李兵 |
精密成形工程 |
2024 |
Novel two‑dimensional HfSi2N4 monolayer with excellent bandgap modulation and electronic properties modulation |
杨名洋 |
黄海铭 |
Journal of Molecular Modeling |
2023 |
酸度系数对水热法合成MoO3物相和形貌的影响 |
吕星 |
罗成 |
粉末冶金技术 |
2023 |
用于超级电容器的二硫化钼纳米片制备及电化学性能研究 |
张蕊 |
沈培智 |
人工晶体学报 |
2023 |
6061铝合金高温拉伸性能的研究 |
邓云飞 |
李兵 |
热加工工艺 |
2023 |
Q960E超高强钢焊接接头组织和性能研究 |
袁耀 |
王金凤 |
精密成形工程 |
2023 |
变截面铝合金传动轴管内高压成形工艺参数多目标优化 |
郭学强 |
奚建胜 |
塑性工程学报 |
2023 |
基于回归方法和神经网络的电弧增材制造单道成形形貌预测 |
曹宜发 |
李峰光 |
精密成形工程 |
2023 |
模锻方法对铝合金轴叉锻造成形的影响 |
邓云飞 |
李兵 |
锻压技术 |
2023 |
热缎模药芯焊丝电弧增材制造熔覆层摩擦磨损性能 |
卢红杰 |
刘建永 |
精密成形工程 |
2023 |
添加Cu3P对铁基粉末冶金气门导管组织与性能的影响 |
吕威 |
王天国 |
粉末冶金工业 |
2023 |
预热温度对H13钢上电弧增材制造20Cr9Mo3Ni2钢组织与性能的影响 |
谢津平 |
曾大新 |
金属热处理 |
2023 |
Effect of Ti particles on microstructure and mechanical properties of Mg–9Al–1Zn based composite sheets |
陈旭栋 |
王天国 |
Journal of Materials Research and Technology |
2023 |
Effect of Ti6Al4V reinforcement particles on the mechanical, wear, and corrosion properties of AZ91D |
余祖英 |
孙建新 |
Journal of Materials Research and Technology |
2023 |
Graphene/polyacrylamide interpenetrating structure hydrogels for wastewater treatment |
王泽林 |
李建 |
Advanced Composites and Hybrid Materials |
2023 |
QP980淬火-配分钢MAG焊接头组织及力学性能研究 |
苏文超 |
王金凤 |
钢铁 |
2023 |
车轮钢闪光对焊工艺参数对焊接接头性能的影响 |
苏文超 |
王金凤 |
精密成形工程 |
2023 |
汽车高强钢锻件淬火开裂分析与有限元模拟 |
吕镓均 |
陈荣创 |
锻压技术 |
2023 |
商用车后视镜背壳结构设计与注塑模具设计 |
吕镓均 |
陈荣创 |
工程塑料应用 |
2023 |
烧结 Nd-Fe-B 磁体表面铝薄膜的性能和微观结构 |
董必成 |
胡志华 |
材料热处理学报 |
2023 |
乙烯基树脂/空心玻璃微珠复合材料的制备及性能研究 |
王泽文 |
李建 |
塑料科技 |
2023 |
Observation of structural, mechanical, thermal and microwave dielectric properties of carbon black reinforced PA6/HDPE nanocomposites |
牛志鹏 |
王越 |
Journal of Materials Science: Materials in Electronics |
2022 |
Polyvinyl Butyral/SiO2 Nanoparticles Composite Coating on Poly(vinylidene fluoride) Separators for Lithium-Ion Batteries |
杨耀钧 |
任伊锦 |
Journal of Macromolecular Science, Part B |
2022 |
烧结温度对粉末冶金304不锈钢的组织和性能的影响 |
刘新宇 |
王天国 |
粉末冶金工业 |
2022 |
层间温度对H13钢丝材电弧增材制造成形质量的影响 |
姜淑馨 |
李峰光 |
精密成形工程 |
2022 |
氮氩比对模具钢表面镀CrAlN薄膜形貌和性能的影响 |
付泽钰 |
王天国 |
表面技术 |
2022 |
工艺参数对H13钢电弧增材制造成形品质的影响 |
姜淑馨 |
李峰光 |
特种铸造及有色合金 |
2022 |
基体偏压对多弧离子镀制备CrAlN薄膜组织和性能的影响 |
付泽钰 |
王天国 |
电镀与涂饰 |
2022 |
基于LabVIEW的座椅耐久性可视化测试系统 |
黄彬 |
张春 |
电子测量技术 |
2022 |
球墨铸铁电弧堆焊热影响区组织演变规律研究 |
何中璞 |
曾大新 |
铸造 |
2022 |
水热法制备掺氮活性炭及其电化学性能研究 |
王幼琪 |
沈培智 |
现代化工 |
2022 |
Influence of hot forming on microstructure and mechanical properties of laser tailor-welded dissimilar ultra-high-strength steels |
袁耀 |
王金凤 |
Advanced Composites and Hybrid Materials |
2022 |
PE排水三通管注塑模具设计与有限元模拟 |
张世阳 |
陈荣创 |
塑料 |
2022 |
Sn含量对粉末冶金304不锈钢组织和性能的影响 |
吕威 |
王天国 |
粉末冶金工业 |
2022 |
Wire-powder-arc additive manufacturing: A viable strategy to fabricate carbide ceramic/aluminum alloy multi-material structures |
虞华森 |
孙建新 |
Additive Manufacturing |
2022 |
激光拼焊异种超高强钢组织和力学性能 |
袁耀 |
王金凤 |
钢铁 |
2022 |
排水45°斜三通注塑模具设计与模拟 |
张世阳 |
肖海峰 |
塑料科技 |
2022 |
时效处理对6061-T6铝合金板组织和力学性能的影响 |
邓云飞 |
李兵 |
热加工工艺 |
2022 |
重卡SMC前面罩模压模具设计 |
黄承昊 |
杨明 |
塑料科技 |
2021 |
铝合金铸件残余应力的形成机制与控制 |
何建刚 |
曾大新 |
铸造技术 |
2021 |
Study on Preparation and Properties of TiCrAlN Film on the Surface of H13 Die Steel by Multi-arc Ion Plating |
付泽钰 |
王天国 |
Journal of Physics: Conference Series |
2021 |
A Flow Stress Model of 300M Steel for Isothermal Tension |
张世阳 |
陈荣创 |
materials |
2021 |
Interface behavior of brazing between Zr-Cu filler metal and SiC ceramic |
李桃花 |
周博芳 |
Crystals |
2021 |
Microstructure and properties of SiC ceramic brazed with Zr–Cu composite filler metal |
李桃花 |
周博芳 |
RSC Advances |
2021 |
Unified Modelling of Flow Stress and Microstructural Evolution of 300M Steel under Isothermal Tension |
张世阳 |
陈荣创 |
metals |
2021 |
基于deform的重型汽车前轴成形工艺及模具设计 |
朱帅 |
奚建胜 |
锻压技术 |
2021 |
商用车外视镜镜框注塑模具设计 |
张世阳 |
陈荣创 |
工程塑料应用 |
2020 |
La对Sr变质Al-9Si-Cu合金组织及冷却曲线特征的影响 |
孙钰 |
曾大新 |
特种铸造及有色合金 |
2020 |
氮氩比对模具钢表面镀 TiAlN 薄膜形貌和性能的影响 |
吴浩龙 |
王天国 |
材料保护 |
2020 |
基体倾斜和熔覆头偏转对激光熔覆层形貌与粉末利用率影响的研究 |
尹一君 |
曾大新 |
应用激光 |
2020 |
激光熔覆H13钢的裂纹敏感性及形成机理 |
杨伟 |
曾大新 |
金属热处理 |
2020 |
碳纤维/乙烯基酯树脂复合材料拉伸性能研究 |
吴晴 |
李建 |
现代塑料加工应用 |
2019 |
5082 铝合金板搅拌摩擦焊搭接接头性能研究 |
柳先 |
罗成、王金凤 |
轻合金加工技术 |
2019 |
PVDF/PVB共混物的非等温结晶动力学 |
杨耀钧 |
任伊锦 |
高分子通报 |
2019 |
选择性激光烧结覆膜砂后处理强化工艺研究 |
杨伟 |
曾大新 |
特种铸造及有色合金 |
2018 |
多弧离子镀TiAlN薄膜的制备及其抗氧化性能研究 |
梁启超 |
王天国 |
材料保护 |
2018 |
植物油基醇酸树脂的制备及其性能研究 |
徐娇娇 |
李建 |
热固性树脂 |