序号 |
论文名称 |
第一作者 |
期刊名称 |
检索 |
年度 |
1 |
Construction of Nanohydroxyapatite/Poly(sodium lipoate)-Based Bioactive Hydrogels for Cranial Bone Regeneration |
杜佳强 |
Biomacromolecules |
SCI |
2024 |
2 |
Heterogeneous multilayered delamination of thermally grown oxide accelerating spallation of thermal barrier coatings |
魏志远 |
Ceramics International |
SCI |
2024 |
3 |
Multiphase magnetic array-anchored layered Fe3O4/FeO/C composites with magnetic coupling effect for highly efficient microwave absorption |
兰笛 |
Ceramics International |
SCI |
2024 |
4 |
Lightweight dielectric-magnetic synergistic necklace-shaped Co@ NCP/carbon nanofiber composites for enhanced electromagnetic wave absorption |
兰笛 |
Materials Today Nano |
SCI |
2024 |
5 |
Effect of cold-rolling and annealing temperature on microstructure, texture evolution and mechanical properties of FeCoCrNiMn high-entropy alloy |
廖露海 |
Journal of Materials Research and Technology |
SCI |
2024 |
6 |
Bi2O3/Bi@CSs achieved by shock-type heating for fast and long-lasting sodium ion battery |
裴亚茹 |
Chemical Engineering Journal |
SCI |
2024 |
7 |
Defect design and vacancy engineering of NiCo2Se4 spinel composite for excellent electromagnetic wave absorption |
兰笛 |
Ceramics International |
SCI |
2024 |
8 |
Heterostructure engineering of N-doped Co@ carbon nanotubes toward broadband efficient electromagnetic absorption |
兰笛 |
Colloids and Surfaces A: Physicochemical and Engineering Aspects |
SCI |
2024 |
9 |
Modulating Magnetic Interface Layer on Porous Carbon Heterostructures for Efficient Microwave Absorption |
兰笛 |
Nano research |
SCI |
2024 |
10 |
Hierarchical porous molybdenum carbide synergic morphological engineering towards broad multi-band tunable microwave absorption |
兰笛 |
Nano research |
SCI |
2024 |
11 |
Processing natural bamboo into white bamboo through photocatalyzed lignin oxidation |
王友勇 |
International Journal of Biological Macromolecules |
SCI |
2024 |
12 |
Exploration of two-dimensional XPY3 (X = Zn, Cd; Y––S, Se) for photocatalytic water splitting |
覃群 |
International Journal of Hydrogen Energy |
SCI |
2024 |
13 |
Texture formation under control of S phase characteristic and tensile property of hot-rolling 2A12 aluminum alloy improved by Brass texture |
赵齐 |
Materials Science ＆ Engineering A |
SCI |
2024 |
14 |
Strong and fire-resistant bamboo enabled by densification and boron nitride/graphene oxide nanocoating |
王友勇 |
Industrial Crops ＆ Products |
SCI |
2024 |
15 |
Fatigue crack propagation of AA2024 alloy under texture control using crystal plasticity coupled with accelerated cyclic cohesive zone model |
赵齐 |
Engineering Fracture Mechanics |
SCI |
2024 |
16 |
Significantly improve the strength and ductility of AZ31 Mg alloy by introducing pure Ti |
陈祥 |
Journal of Materials Science ＆ Technology 材料科学技术（英文版） |
SCI |
2024 |
17 |
Recent advances in construction strategies and multifunctional properties of flexible electromagnetic wave absorbing materials |
兰笛 |
MATERIALS RESEARCH BULLETIN |
SCI |
2024 |
18 |
Binder-free MOF-based and MOF-derived nanoarrays for flexible electrochemical energy storage: progress and perspectives |
蔡东明 |
Small |
SCI |
2023 |
19 |
Electronic structure and optical property of 2D MgPX3 (X = S and Se) Monolayer by density functional theory |
杨俊涛 |
Physica Status Solidi (B)-Basic Solid State Physics |
SCI |
2023 |
20 |
Graphene/polyacrylamide interpenetrating structure hydrogels for wastewater treatment. |
朱秀芳 |
Advanced Composites and Hybrid Materials |
SCI |
2023 |
21 |
Design and preparation of polytetrafluoroethylene/carbon (PTFE/C) composite membrane-equivalent foam for gravity-driven emulsion separation. |
果小明 |
Polymer International |
SCI |
2023 |
22 |
Immiscible thermoplastic polymer blends with alternative layered encapsulation structure: modeling and processing, |
王越 |
Polymer |
SCI |
2023 |
23 |
Observation of structural, mechanical, thermal and microwave dielectric properties of carbon black reinforced PA6/HDPE Nanocomposites |
王越 |
Journal of Materials Science: Materials in Electronics |
SCI |
2023 |
24 |
Chiral supramolecular 2D halogen-bonded organic frameworks constructed by post-synthetic modified cross-linking strategy. |
夏宁 |
Science China-Chemistry |
SCI |
2023 |
25 |
Significantly improve the strength and ductility of AZ31 Mg alloy by introducing pure Ti. |
陈祥 |
Journal of Materials Science & Technology |
SCI |
2023 |
26 |
Optimizing the strength and ductility of pure aluminum laminate via tailoring coarse/ultrafine grain layer thickness ratio. |
陈祥 |
Journal of Materials Research and Technology |
SCI |
2023 |
27 |
Impact mechanisms of aggregation state regulation strategies on the microwave absorption properties of flexible polyaniline. |
兰笛 |
Journal of Colloid and Interface Science |
SCI |
2023 |
28 |
A polymer sponge with dual absorption of mechanical and electromagnetic energy. |
兰笛 |
Journal of Colloid and Interface Science |
SCI |
2023 |
29 |
Recent advances in construction strategies and multifunctional properties of flexible electromagnetic wave absorbing materials |
兰笛 |
Materials Research Bulletin |
SCI |
2023 |
30 |
Formation and development of goss texture in Al–Cu–Mg alloy during solution treatment |
赵齐 |
Journal of Materials Science |
SCI |
2023 |
31 |
Flexible poly (butylene adipate-co-butylene terephthalate) enabled high-performance polylactide/wood fiber biocomposite foam |
王友勇 |
Industrial Crops and Products |
SCI |
2023 |
32 |
Effect of Ti6Al4V reinforcement particles on the mechanical, 33wear, and corrosion properties of AZ91D magnesium matrix composites |
孙建新 |
Journal of Materials Research and Technology |
SCI |
2023 |
33 |
Precipitation behavior and corrosion properties of friction stir welded AA5083 Al-Mg alloy after sensitization |
顾小燕 |
Materials Characterization |
SCI |
2023 |
34 |
Janus breathing-Kagome lattice Nb3TeX7 (X = Cl, Br and I) with low thermal conductivity and high thermoelectric figure of merit |
饶晓晓 |
Vacuum |
SCI |
2023 |
35 |
Theoretical investigation of the electronic structure and thermoelectric performance of 2D GeSb2Te4 and GeBi2Te4 |
饶晓晓 |
Vacuum |
SCI |
2023 |
36 |
Single-layer XBi2Se4 (X = Sn Pb) with multi-valley band structures and excellent thermoelectric performance |
饶晓晓 |
Ceramics International |
SCI |
2023 |
37 |
NaCuX (X = Se, Te): Novel 2D materials simultaneously with ultra-low thermal conductivity and high thermoelectric figure of merit |
盛晓菲 |
Materials Today Communications |
SCI |
2023 |
38 |
The stability, mechanical, electronic and thermoelectric properties of unexplored monolayer Ca4Sb2O and Ca4Bi2O |
盛晓菲 |
Vacuum |
SCI |
2023 |
39 |
Influence of hydrostatic pressure on the corrosion and discharging behavior of Al-Zn-In-Mg-Ti alloy |
胡胜波 |
Journal of Alloys and Compounds |
SCI |
2023 |
40 |
Effects of Zn content on the microstructure and properties of Al-12.5 Si-xZn-2Cu-Mg alloy |
郭睿 |
International Journal of Metalcasting |
SCI |
2023 |
41 |
New method and mechanism for quickly obtaining quenching sensitivity temperature range of 7055 aluminum alloy |
盛晓菲 |
Transactions of Nonferrous Metals Society of China |
SCI |
2023 |
42 |
Effect of Ti particles on microstructure and mechanical properties of Mge9Ale1Zn based composite sheets |
王天国 |
Journal of Materials Research and Technology |
SCI |
2023 |
43 |
用于超级电容器的二硫化钼纳米片制备及电化学性能研究 |
沈培智 |
人工晶体学报 |
CSCD |
2023 |
44 |
模具钢表面多弧离子镀CrAlN涂层的制备及其摩擦性能研究 |
覃群 |
润滑与密封 |
中文核心 |
2023 |
45 |
多弧离子镀TiCrAlN涂层的制备及其摩擦性能研究 |
覃群 |
热加工工艺 |
中文核心 |
2023 |
46 |
真空烧结温度对含Sn奥氏体不锈钢组织和性能的影响 |
覃群 |
粉末冶金工业 |
中文核心 |
2023 |
47 |
基体偏压对H13钢表面镀TiAlCrN薄膜结构和性能的影响 |
覃群 |
电镀与精饰 |
中文核心 |
2023 |
48 |
氮氩比对多弧离子镀 TiAlSiN薄膜形貌和性能的影响 |
覃群 |
材料保护 |
CSCD |
2023 |
49 |
工艺参数对H13钢激光合金化组织与硬度的影响 |
郭睿 |
特种铸造及有色合金 |
CSCD |
2023 |
50 |
Zn含量对Al-12Si-xZn-2Cu-Mg合金铸造性能的影响 |
郭睿 |
特种铸造及有色合金 |
CSCD |
2023 |
51 |
车用高强钢厚板模内淬火组织演变研究 |
王敏 |
精密成形工程, |
CSCD |
2023 |
52 |
时效对ADC12压铸铝合金组织和性能的影响 |
马冬威 |
金属热处理 |
CSCD |
2023 |
53 |
基于OBE工程教育理念的材料科学与工程专业综合实践课程教学改革 |
马冬威 |
中国技术教育装备 |
核心期刊 |
2023 |
54 |
QP980淬火-配分钢MAG焊接头组织及力学性能 |
王金凤 |
钢铁 |
CSCD |
2023 |
55 |
车轮钢闪光对焊工艺参数对焊接接头性能的影响 |
王金凤 |
精密成形工程 |
核心期刊 |
2023 |
56 |
固溶处理对 CMT 电弧熔丝增材Inconel625合金组织与性能调控 |
顾小燕 |
焊接学报 |
EI |
2023 |
57 |
选区激光烧结PS/PMMA成形工艺优化与性能研究 |
顿亚鹏 |
应用激光 |
CSCD |
2023 |
58 |
模锻方法对铝合金轴叉锻造成形的影响 |
李兵 |
锻压技术 |
CSCD |
2023 |
59 |
自阻加热温度对5052铝合金板力学性能和组织的影响 |
李兵 |
热加工工艺 |
核心期刊 |
2023 |
60 |
激光熔覆WC增强镍基复合涂层的组织与性能研究 |
刘峰 |
特种铸造及有色合金 |
核心期刊 |
2023 |
61 |
PE排水三通管注塑模具设计与有限元模拟 |
陈荣创 |
塑料 |
CSCD |
2022 |
62 |
汽车高强钢锻件淬火开裂分析与有限元模拟 |
陈荣创 |
锻压技术 |
CSCD |
2022 |
63 |
Fatigue crack propagation across grain boundary of Al-Cu-Mg bicrystal based on crystal plasticity XFEM and cohesive zone model |
赵齐 |
Journal of Materials Science & Technology |
SCI |
2022 |
64 |
基于冷金属过渡的电弧熔丝增材Inconel 625合金的组织与性能研究 |
林筱鹏 |
材料保护 |
CSCD |
2022 |
65 |
Study on forming uniformity of multi-electromagnetic forming (EMF) of aluminum sheet metal |
刘贤龙 |
The International Journal of Advanced Manufacturing Technology |
SCI |
2022 |
66 |
Deciphering the effect of W and Mo co-additions on recrystallization behavior and strengthening mechanism of CrCoNi medium entropy alloy |
盛晓菲 |
Journal of Alloys and Compounds |
SCI |
2022 |
67 |
Effects of SiC content on the mechanical and thermophysical properties of 3D Cf/SiC–Al composites |
李聪 |
Ceramics International |
SCI |
2022 |
68 |
Orientation relationships between precipitates and matrix and their crystallographic transformation in a Cu–Cr–Zr alloy |
盛晓菲 |
Materials Science ＆ Engineering A |
SCI |
2022 |
69 |
2D plane XP2 (X = Ni, Pd, Pt) with narrow band gaps, ultrahigh carrier mobility and high electrical transport performance |
盛晓菲 |
Applied Surface Science |
SCI |
2022 |
70 |
激光拼焊异种超高强钢组织和力学性能 |
王金凤 |
钢铁 |
CSCD |
2022 |
71 |
Influence of hot forming on microstructure and mechanical properties of laser tailor-welded dissimilar ultra-high-strength steels |
王金凤 |
Advanced Composites and Hybrid Materials |
SCI |
2022 |
72 |
Promoting of metallurgical bonding by ultrasonic insert process in steel-aluminum bimetallic castings |
郭睿 |
High Temperature Materials and Processes |
SCI |
2022 |
73 |
Texture Evolution of Hot Rolled Al–Cu–Mg–Zr Alloy During Annealing |
赵齐 |
Metals and Materials International |
SCI |
2022 |
74 |
Effect of trace alloying elements on the stress relaxation properties of high strength Cu–Ti alloys |
盛晓菲 |
Materials Science ＆ Engineering A |
SCI |
2022 |
75 |
多弧离子镀TiAlCrN薄膜的制备及其抗氧化性能研究 |
付泽钰 |
材料保护 |
CSCD |
2022 |
76 |
Wire-powder-arc additive manufacturing: A viable strategy to fabricate carbide ceramic/aluminum alloy multi-material structures |
孙建新 |
Additive Manufacturing |
SCI |
2022 |
77 |
Monolayer XN2 (X––Ti, Zr, Hf): Novel 2D materials with high stability, simultaneously high electron and hole mobilities from density functional theory |
盛晓菲 |
Materials Today Communications |
SCI |
2022 |
78 |
国内铝合金导电化学氧化研究现状 |
李海丰 |
电镀与涂饰 |
CSCD |
2022 |
79 |
Uncovering microstructure evolution and dynamic softening mechanism of spray deposited AlZnMgCu Alloy under thermal deformation |
盛晓菲 |
Metals and Materials International |
SCI |
2022 |
80 |
Polyvinyl butyral/SiO2 nanoparticles composite coating on poly (vinylidene fluoride) separators for lithium-ion batteries |
任伊锦 |
Journal of Macromolecular Science, Part B: Physics |
SCI |
2022 |
81 |
Study on preparation and properties of TiCrAlN film on the surface of H13 die steel by multi-arc ion plating |
付泽钰 |
Journal of Physics Conference Series |
EI |
2022 |
82 |
Flexible and highly-sensitive pressure sensor based on controllably oxidized MXene |
马亚楠 |
InfoMat |
SCI |
2022 |
83 |
First-principles investigations on the magnetic, electronic, and optical properties of honeycomb-kagome structured Fe2O3 monolayer |
杨俊涛 |
Journal of Superconductivity and Novel Magnetism |
SCI |
2022 |
84 |
Co2N0.67/MoO2 heterostructure as high efficiency electrocatalysts for the hydrogen evolution reaction |
童锐 |
ACS Applied Energy Materials |
SCI |
2022 |
85 |
Transition of spin gapless semiconductor to semiconductor and half metal in ferromagnetic Ba2MnTeO6 |
黄海铭 |
Results in Physics |
SCI |
2021 |
86 |
First-principles study of the physical properties of the new quaternary heusler alloy CoMnVZ (Z = Sn and Sb) |
黄海铭 |
Physics of the Solid State |
SCI |
2021 |
87 |
Electronic structures, magnetic properties and mechanical stability of half-metallic quaternary heusler CoMnVTe |
黄海铭 |
Applied Physics A Materials Science & Processing |
SCI |
2021 |
88 |
Modulation of strain, electric field and organic cation rotation on the band gap and electronic structures of 175organic-inorganic hybrid perovskite CH3NH3PbI3 |
黄海铭 |
Chinese Journal of Physics |
SCI |
2021 |
89 |
Study on microstructure and properties of Zn-Sn coating on sintered Nd-Fe-B magnets by grain boundary diffusion process |
胡志华 |
Anti-Corrosion Methods and Materials |
SCI |
2021 |
90 |
Microstructure and properties of SiC ceramic brazed with Zr–Cu composite filler metal |
周博芳 |
RSC Advances |
SCI |
2021 |
91 |
Fatigue crack propagation within Al-Cu-Mg single crystals based on crystal plasticity and XFEM combined with cohesive zone model |
赵齐 |
Materials & Design |
SCI |
2021 |
92 |
Interface behavior of brazing between Zr-Cu filler metal and SiC ceramic |
周博芳 |
Crystals |
SCI |
2021 |
93 |
Unified modelling of flow stress and microstructural evolution of 300M Steel under isothermal tension |
陈荣创 |
Metals |
SCI |
2021 |
94 |
Grain-orientation induced stress formation in AA2024 monocrystal and bicrystal using crystal plasticity finite element method |
赵齐 |
Materials & Design |
SCI |
2021 |
95 |
Controllable fabrication of large-size defect-free domains of 2D colloidal crystal masks guided by statistical experimental design |
盛晓菲 |
Coatings |
SCI |
2021 |
96 |
A flow stress model of 300M steel for isothermal tension |
陈荣创 |
Materials |
SCI |
2021 |
97 |
Enhanced Brass texture of hot-rolled Al-4Cu-1.6Mg alloy by 0.1% Zr addition |
赵齐 |
Materials Characterization |
SCI |
2020 |
98 |
Mechanism for enhancing the corrosion resistance in a spray deposition aluminum alloy Al-8.31Zn-2.46Cu-2.07Mg-0.12Zr |
盛晓菲 |
JOURNAL OF ALLOYS AND COMPOUNDS |
SCI |
2020 |
99 |
Optimization of Synthesizing Upright ZnO Rod Arrays with Large Diameters through Response Surface Methodology |
盛晓菲 |
PROCESSES |
SCI |
2020 |
100 |
Effect of Magnesium on Microstructure Refinements and Properties Enhancements in High-Strength CuNiSi Alloys |
盛晓菲 |
ACTA METALLURGICA SINICA-ENGLISH LETTERS |
SCI |
2020 |
101 |
Electronic and Thermoelectric Properties of V2O5, MgV2O5, and CaV2O5 |
盛晓菲 |
Coatings |
SCI |
2020 |
102 |
Microstructure Evolution of 5052 Aluminum Sheet in Electromagnetic High-Speed Impact |
冯飞 |
Metals |
SCI |
2020 |
103 |
Flow-Stress Model of 300M Steel for Multi-Pass Compression |
陈荣创 |
Metals |
SCI |
2020 |
104 |
Evolution of Goss texture in an Al–Cu–Mg alloy during cold rolling |
赵齐 |
Archives of Civil and Mechanical Engineeing |
SCI |
2020 |
105 |
Hot Extrusion Enhanced Homogenization of Microstructure in a Spray Deposition Aluminum Alloy |
盛晓菲 |
Metals |
SCI |
2020 |
106 |
Effect of Brazing Parameters on the Microstructure and Properties of Si C Ceramic Joint with Zr-Cu Filler Metal |
周博芳 |
Crystals |
SCI |
2020 |
107 |
Microstructure and mechanical properties of a CuNiTi alloy with a large product of strength and elongation |
盛晓菲 |
Journal of Materials Research and Technology |
SCI |
2020 |
108 |
Mechanism of grain refinement in an equiatomic medium-entropy alloy CrCoNi during hot deformation |
盛晓菲 |
Journal of Alloys and Compounds |
SCI |
2020 |
109 |
Study on the wetting interface of Zr–Cu alloys on the SiC ceramic surface |
周博芳 |
RSC ADV |
SCI |
2020 |
110 |
Microstructure and Mechanical Properties of Friction Stir Welded Joint of an Aluminum Alloy Sheet 6005A-T4 |
盛晓菲 |
Metals |
SCI |
2019 |
111 |
FEM Simulation and Verification of Brazing SiC Ceramic with Novel Zr-Cu Filler Metal |
周博芳 |
mterials |
SCI |
2019 |
112 |
Texture effect on fatigue crack propagation in aluminium alloys: an overview |
赵齐 |
Materials Science and Technology |
SCI |
2019 |
113 |
Hot Workability of 300M Steel Investigated by In Situ and Ex Situ Compression Tests |
陈荣创 |
Metals |
SCI |
2019 |
114 |
Flow Behavior and Hot Processing Map of GH4698 for Isothermal Compression Process |
陈荣创 |
Processes |
SCI |
2019 |
115 |
High Wear-Resistant Aluminum Matrix Composite Layer Fabricated by MIG Welding with Lateral B4C Powder Injection |
孙建新 |
Journal of Materials Engineering and Performance |
SCI |
2018 |
116 |
The role of cobalt addition in magnetic and mechanical properties of high intrinsic coercivity Nd-Fe-B magnets |
胡志华 |
Journal of Alloys and Compounds |
SCI |
2018 |
117 |
Coincidence site lattice boundary mechanism for the preferred growth of Goss and Cube grains during annealing in an Al-Cu-Mg alloy |
赵齐 |
Materials Characterization |
SCI |
2018 |
118 |
Preparation, Antibacterial and Antistatic Properties of PP/Ag-Ms/CB Composites |
杨明 |
武汉理工大学学报（材料科学版） |
SCI |
2018 |
119 |
A Review of Texture Evolution Mechanisms During Deformation by Rolling in Aluminum Alloys |
李莎莎 |
Journal of Materials Engineering and Performance |
SCI |
2018 |
120 |
Superior catalytic activity of in situ reduced metallic Co for hydrogen storage in a Co(OH)2-containing LiBH4/2LiNH2 composite |
张喻 |
Materials Research Bulletin |
SCI |
2018 |
121 |
Hot Deformation Behavior of a Spray-Deposited Al-8.31Zn-2.07Mg-2.46Cu-0.12Zr Alloy |
盛晓菲 |
metals |
SCI |
2017 |
122 |
硼钢热冲压中等效接触换热系数的反演 |
王敏 |
先进制造技术 |
SCI |
2016 |
123 |
Influence of dysprosium substitution on magnetic and mechanical properties of high intrinsic coercivity Nd-Fe-B magnets prepared by double-alloy powder mixed method |
胡志华 |
Journal of rare earth |
SCI |
2016 |
124 |
A study of the softening mechanisms of laser-welded DP1000 steel butt joints |
王金凤 |
material & design |
SCI |
2016 |
125 |
Effect of energy input on the microstructure and properties of butt joints in DP1000 steel laser welding |
王金凤 |
material & design |
SCI |
2016 |
126 |
Enhanced magnetic and mechanical properties of die-upset Nd–Fe–B magnets prepared by spark plasma sintering via alloy powder blends |
胡志华 |
Journal of magnetism and magnetic materials |
SCI |
2016 |