序号 |
论文名称 |
第一 作者 |
期刊或会议名称 |
检索 |
年度 |
1 |
Analysis of ring-opening reaction between bisphenol A and epichlorohydrin by the method of quantum chemical calculating |
李建 |
APPF 2010 |
EI、CPCI-S |
2011 |
2 |
1Crl8Ni9Ti奥氏体不锈钢TIG焊接性能研究 |
刘峰 |
热加工工艺 |
|
2011 |
3 |
TiB2/Ni coatings on surface of copper alloy electrode prepared by electrospark deposition |
罗成 |
Transactions of Nonferrous Metals Society of China |
SCI、EI |
2011 |
4 |
Absorptive and biodegraded polyurethane foamed urea |
李建 |
ICAMMP 2010 |
EI、CPCI-S |
2011 |
5 |
Ethylene polymerization by phenyl sulfide bridged dinuclear titanocene complex/MAO |
聂玉静 |
ICMST 2010 |
EI、CPCI-S |
2011 |
6 |
Study of structure and performance on laser welding of copper sheet |
刘峰 |
Journal of Functional Materials |
EI |
2011 |
7 |
Ethylene polymerization by phenyl sulfide bridged dinuclear zirconocene complex/MAO |
聂玉静 |
ICMST 2010 |
EI、CPCI-S |
2011 |
8 |
Analysis of the ring-closing of chloride polyether polyol by the method of quantum chemical calculating |
李建 |
ICMSEA 2011 |
EI、CPCI-S |
2011 |
9 |
Ethylene polymerization by thioether bridged dinuclear titanocene complex |
聂玉静 |
ICAMR 2011 |
EI、CPCI-S |
2011 |
10 |
Effect of rare earth on 30CrMnSi steel investment castings cracking |
唐正连 |
ICMSEA 2011 |
EI |
2011 |
11 |
高熔点金属电弧喷涂快速制模工艺研究 |
刘峰 |
模具工业 |
|
2011 |
12 |
Effect of Er2O3 on the microstructure and electrical properties of (Er, Ta)-doped TiO2 capacitor-varistor ceramics |
王天国 |
OEMA 2011 |
EI、CPCI-S |
2011 |
13 |
Design of thermal transferring of plane mould for low pressure sheet molding compound |
李建 |
ICFMD2010 |
EI |
2011 |
14 |
The synthesis of binuclear mono-cyclopentadinyl titanocene and its using for aqueous homo-polymerization of methyl methacrylate |
聂玉静 |
ICFMD2010 |
EI |
2011 |
15 |
Preparation and properties of polyethylene/montmorillonite composites |
杨旭宇 |
ICAMCS 2011 |
EI |
2011 |
16 |
基于NX和Moldflow的汽车灯罩注射模设计与分析 |
刘峰 |
塑料 |
|
2011 |
17 |
Mechanical properties of UP resin from soybean oil |
李建 |
ICRTMME 2011 |
EI |
2011 |
18 |
超硬高速钢M2Si的热处理工艺 |
饶晓晓 |
金属热处理 |
|
2011 |
19 |
Effect of CeO2 on the electrical properties of Ta2O5-doped TiO2 capacitor-varistor ceramics |
王天国 |
ICKEM 2011 |
EI、CPCI-S |
2011 |
20 |
Preparing of SMC artificial marble and its mechanical properties |
李建 |
ICRTMME 2011 |
EI |
2011 |
21 |
真空热处理对Co-W电刷镀镀层的影响 |
饶晓晓 |
汽车科技 |
|
2011 |
22 |
Ethylene polymerization by thioether bridged dinuclear zirconocene complex |
聂玉静 |
ICAMR 2011 |
EI、CPCI-S |
2011 |
23 |
Research on the molding parameters for low pressure sheet molding compounds |
李建 |
ICFMD2010 |
EI |
2011 |
24 |
扩散焊制备铜铝复合板的组织性能研究 |
刘峰 |
热加工工艺 |
|
2011 |
25 |
Study on the effect of thermal design of plane mould on the mechanical properties of epoxy sheet molding compounds |
李建 |
APPF 2010 |
EI、CPCI-S |
2011 |
26 |
Study on the Fiber Distribution and Fiber Orientation in Low Pressure Sheet Molding Compounds |
李建 |
ICMEA 2010 |
EI、CPCI-S |
2011 |
27 |
真空热处理对Ni-W电刷镀镀层性能的影响 |
饶晓晓 |
热加工工艺 |
|
2011 |
28 |
Effect of La2O3 on the electrical properties of WO3-based varistor ceramics |
王天国 |
ICMEAT 2011 |
EI |
2011 |
29 |
基于CAD/CAE的汽车前围加强板的成形工艺研究 |
肖海峰 |
锻压装备与制造技术 |
|
2011 |
30 |
Study on the Piezoelectric and Damping Properties of NBR/PF/PMN/CB Composites |
李建 |
ADVANCED SCIENCE LETTERS |
SCI |
2011 |
31 |
Study on modification of phenolic resin/glass fiber composite by polyvinyl alcohol |
杨明 |
ICFMD2010 |
EI |
2011 |
32 |
超薄紫铜激光焊接工艺研究 |
王金凤 |
热加工工艺 |
|
2011 |
33 |
Effect of Sm2O3 on the electrical properties of TiO2-Ta2O5-based capacitor-varistor ceramics |
王天国 |
ICAMR 2011 |
EI、CPCI-S |
2011 |
34 |
Thickening and rheological properties of crystalline polyester used in low pressure sheet molding compounds |
李建 |
Chinese Journal of Mechanical Engineering (English Edition) |
SCI、EI |
2011 |
35 |
Application of hyper-dispersant in PP/OMMT composite |
杨旭宇 |
ICAMCS 2011 |
EI |
2011 |
36 |
H11钢锻模挤压铸造模具设计及成形工艺 |
叶四友 |
特种铸造及有色合金 |
|
2011 |
37 |
Thickening mechanism of crystalline polyester involved in low pressure sheet molding compounds |
李建 |
ICAMMP 2010 |
EI、CPCI-S |
2011 |
38 |
Effect of temperature on microstructure and electrical properties of (Y, Ta)-doped TiO2 capacitor-varistor ceramics |
王天国 |
ICKEM 2011 |
EI、CPCI-S |
2011 |
39 |
挤压铸造H11钢锻模缺陷分析及对策 |
叶四友 |
铸造技术 |
|
2011 |
40 |
环氧片状模塑料用微胶囊固化剂的制备 |
李建 |
粘接 |
|
2011 |
41 |
Study on low profile SMC for the production of cylinder head cover |
杨明 |
APPF 2010 |
EI、CPCI-S |
2011 |
42 |
Microstructure and electrical properties of Nd2O 3-doped TiO2-Ta2O5-based capacitor-varistor ceramics |
王天国 |
ICMSEA 2011 |
EI、CPCI-S |
2011 |
43 |
Study on the application of low density SMC for automotive |
杨明 |
ICMSES 2010 |
EI、CPCI-S |
2011 |
44 |
基于冲压成形分析的顶盖模具设计 |
喻旻 |
化学工程与装备 |
|
2011 |
45 |
感应重熔Ni60/WC涂层的界面组织与耐磨性研究 |
张红霞 |
特种铸造及有色合金 |
|
2011 |
46 |
汽车后桥从动齿轮的失效分析 |
赵玉梅 |
机械制造 |
|
2011 |
47 |
Microstructure and electrical properties of Y2O 3-doped WO3-based ceramicsm varistor |
王天国 |
CEAM 2011 |
EI |
2011 |
48 |
Study on recycling of waste styrofoam for adhesive |
杨明 |
ICMST 2010 |
EI、CPCI-S |
2011 |
49 |
汽车发动机回油管失效分析 |
张红霞 |
焊接技术 |
|
2011 |
50 |
基于CAE的汽车覆盖件展开及排样设计 |
叶四友 |
锻压装备与制造技术 |
|
2011 |
51 |
Study on the chloromethylation of polyaniline |
聂玉静 |
ICFMD2010 |
EI |
2011 |
52 |
Study on the swelling and deswelling of the PH / thermosensitive hydrogel |
朱秀芳 |
ICRTMME 2011 |
EI |
2011 |
53 |
汽车轮辋焊接区裂纹分析 |
赵玉梅 |
装备维修技术 |
|
2011 |
54 |
基于PAM-STAMP的汽车加强板模具结构优化 |
肖海峰 |
模具工业 |
|
2011 |
55 |
Study on non-equilibrium grain-boundary segregation of sulfur among Hastelloy X |
杨明 |
ICMST 2010 |
EI、CPCI-S |
2011 |
56 |
稀土元素对精密铸钢裂纹形成的影响 |
张红霞 |
湖北汽车工业学院学报 |
|
2011 |
57 |
Effect of Pr on the microstructure and electrical properties of Ta-doped TiO2 capacitor-varistor ceramics |
王天国 |
IUMRS-ICA2010 |
EI |
2011 |
58 |
H11钢锻模液态模锻试验与模具结构改进 |
叶四友 |
模具工业 |
|
2011 |
59 |
基于冲压成形分析的横梁拉深模设计 |
喻旻 |
模具工业 |
|
2011 |
60 |
Effect of TiO2 nano powder on the microstructure and electrical properties of TiO2 capacitor-varistor ceramics |
王天国 |
ICMMT 2011 |
EI |
2011 |
61 |
Study on the synthesis of vinyl ester and its using as thickener for SMC |
杨明 |
ICMSES 2010 |
EI、CPCI-S |
2011 |
62 |
Microstructure and mechanical properties of Ti-6Al-Mo-Fe alloy prepared by powder metallurgy |
王天国 |
ICAMMP 2010 |
EI、CPCI-S |
2011 |
63 |
30CrMnTi合金钢热处理工艺研究 |
张红霞 |
湖北汽车工业学院学报 |
|
2011 |
64 |
The synthesis and characteristic properties of poly (AAc-Co-AAm) |
朱秀芳 |
ICAMR 2011 |
EI |
2011 |
65 |
The synthesis and feature of the hydrogel sensitive to PH/electronic field |
朱秀芳 |
ICAMCS 2011 |
EI |
2011 |
66 |
汽车后桥从动齿轮断齿和齿面损伤失效分析 |
张红霞 |
热加工工艺 |
|
2011 |
67 |
The mechanical feature and dependence of the pH-sensitive hydrogel |
朱秀芳 |
ICAMR 2011 |
EI |
2011 |
68 |
稀土元素在金属表面改性中的应用 |
张红霞 |
金属热处理 |
|
2011 |
69 |
FeSi45还原剂对Cr12MoV钢TD处理的影响研究 |
李兵 |
广东化工 |
|
2012 |
70 |
Microstructure and formation mechanism of TiB2/TiC bilaminar coatings deposited on copper electrode surface by electrosparking |
罗成 |
Materials Science and Engineering of Powder Metallurgy |
EI |
2012 |
71 |
电弧喷涂快速制模用石膏母模的收缩性 |
刘峰 |
特种铸造及有色合金 |
|
2012 |
72 |
Effect of TiO2 nano powder on the microstructure and electrical properties of TiO2 capacitor-varistor ceramics |
王天国 |
ICMMT 2011 |
EI |
2012 |
73 |
石墨烯/聚丙烯复合材料的等温结晶动力学研究 |
杨旭宇 |
塑料科技 |
|
2012 |
74 |
WC-Ni增强Fe基梯度涂层的制备及组织性能 |
袁有录 |
中国表面工程 |
|
2012 |
75 |
Microstructures and Mechanical Properties of TiAl-based Alloys Prepared by High-energy Ball milling and Hot-Pressing Sintering |
王天国 |
ICPNS2010 |
|
2012 |
76 |
Modeling synthesis of carbon nanotubes by using injection Chemical Vapor Deposition reactor |
曾大新 |
Journal of Computational and Theoretical Nanoscience |
SCI、EI |
2012 |
77 |
中厚板U形弯曲成形有限元模拟及工艺研究 |
李兵 |
热加工工艺 |
|
2012 |
78 |
Microstructures and mechanical properties of TiAl-based alloys prepared by high energy ball milling and hot-pressing sintering- |
王天国 |
ICPNS2010 |
EI、CPCI-S |
2012 |
79 |
4Cr5MoSiV钢锻模挤压铸造熔炼技术研究 |
叶四友 |
铸造设备与工艺 |
|
2012 |
80 |
Controllable Reduction and Structural Characterizations of Graphene Oxides |
杨旭宇 |
CHEMICAL JOURNAL OF CHINESE UNIVERSITIES |
SCI |
2012 |
81 |
冷挤压工艺有限元模拟参数灵敏度分析 |
李兵 |
湖北汽车工业学院学报 |
|
2012 |
82 |
真空钎焊纯铝用铝基钎料及其钎焊接头性能研究 |
刘峰 |
热加工工艺 |
|
2012 |
83 |
Experimental investigation of mechanical press dynamic behaviors by ram displacement waveform curves |
张春 |
ADME 2012 |
EI |
2012 |
84 |
The synthesis and feature rearch on the thermosensitive hydrogels(NIPA-co-AAm) |
朱秀芳 |
ICPNS2010 |
EI、CPCI-S |
2012 |
85 |
稀土硅铁合金对4Cr5MoSiV钢组织和性能的影响 |
叶四友 |
热加工工艺 |
|
2012 |
86 |
等离子熔覆WC-Ni/Fe梯度涂层的组织与性能 |
袁有录 |
材料热处理学报 |
EI |
2012 |
87 |
Application MEMS multi-sensors for monitoring the forming load of stamping press |
张春 |
ICMA 2012 |
EI |
2012 |
88 |
环氧树脂非等温固化动力学及其固化工艺的研究 |
李建 |
广东化工 |
|
2013 |
89 |
先进高强钢填粉焊接工艺研究 |
王金凤 |
装备维修技术 |
|
2013 |
90 |
Ni60A+WC增强梯度涂层中WC的溶解与碳化物的析出特征 |
袁有录 |
材料工程 |
EI |
2013 |
91 |
基于PAM-STAMP的高强钢板热成形工艺研究 |
肖海峰 |
热加工工艺 |
|
2013 |
92 |
基于胀形仿真中间模型的渐进成形轨迹生成方法 |
张春 |
International Journal of Advanced Manufacturing Technology |
SCI、EI |
2013 |
93 |
柱状碳化物(Cr,Fe)7C3 增强Fe基涂层的摩擦磨损性能 |
袁有录 |
材料研究学报 |
|
2013 |
94 |
基于PamStamp的高强钢板热成形工艺研究 |
肖海峰 |
湖北汽车工业学院学报 |
|
2013 |
95 |
Isothermal crystallization behavior of GO/PA6 composite |
杨旭宇 |
功能材料 |
EI |
2013 |
96 |
高体积分数(Cr,Fe)7C3增强Fe基涂层的组织及耐磨性研究 |
袁有录 |
摩擦学学报 |
EI |
2013 |
97 |
基于液压胀形CAE分析中间模型的负向渐进成形 |
张春 |
Reviews on Advanced Materials Science |
SCI、EI |
2013 |
98 |
Analysis of nucleation of carbide (Cr, Fe)7C3 in the Cr3C2/Fe-CrNiBSi composite coating |
袁有录 |
Surface and Coatings Technology |
SCI、EI |
2013 |
99 |
Effect of activating hot dipping aluminum process on high strength steel and aluminum alloy welding properties |
张元好 |
MME 2013 |
EI |
2013 |
100 |
Functionalization of graphene using trimethoxysilanes and its reinforcement on polypropylene nanocomposites |
杨旭宇 |
Chemical Physics Letters |
SCI、EI |
2013 |
101 |
Microstructure and dry sliding wear behavior of Fe-based (Cr, Fe) 7C3 composite coating fabricated by PTA welding process |
袁有录 |
Journal of Materials Engineering and Performance |
SCI、EI |
2013 |